Production tools and materials
The tools and materials required for making wood veneer are as follows:
1. Wood: Select the corresponding wood according to the needs, such as oak, birch, beech, etc.
2. Saw: Used to cut wood into the desired size.
3. Chisel: Used to cut wood into thin pieces.
4. Sandpaper: Used for polishing and making wood veneer.
Glue: Used to stick wood veneer onto components that require decoration.
Production steps
1. Cut the wood into the required size and shape.
2. Use a chisel to cut the wood into thin pieces. You can choose the appropriate angle and force as needed, and maintain hand stability during production to avoid damaging the wood.
3. Polish the thin wooden pieces to make their surface smooth.
4. Apply glue to the parts that need to be decorated, and slowly adhere the made wood veneer from one end to ensure its integrity and flatness.
After splicing, press a heavy object onto the wood veneer to ensure it is firmly bonded.
Production techniques and precautions
1. Choose suitable wood and try to maintain its original color and texture to fully utilize the decorative beauty of the wood veneer.
2. During production, attention should be paid to safety to avoid cutting fingers.
3. When making, appropriate cutting tools should be selected with moderate force, and excessive or insufficient cutting tools should not be used.
4. The prepared wood veneer should be classified and stored according to specifications for future use.
When pasting wood veneer, the amount of glue used should be appropriate to the size and shape of the veneer, avoiding the use of too much or too little glue.