Wood veneer is a common decorative material, which is mainly used in the production fields of furniture, decorative panels, wooden doors, floor fabrics. Wood skin can be divided into technology wooden veneer, natural wood veneer and dyed wooden skin. Here are how the wooden skin is made:
Wooden cutting method: The straight lines and patterns of the wooden skin are produced by different cutting methods. The commonly used wooden standard cutting method is as follows:
1. Cut, install the log in the middle of the lathe, insert the cutting knife into the log at a small angle, and then rotate the raw wood on the sliced knife to create a rotary -cut wooden skin.
2. String cut, also known as flat -cut, flat slice/flat slices. String -cut wooden skin refers to the parallel line of the sliced knife along the parallel line of the center of the wood. The annual wheel will form a pattern wood grain.
3. Cut the diameter, cut the annual wheel of the log vertically, and produce the wooden skin that presents straight lines.
4. Cut the slices, cutting wooden cutting wood is made of various oak. The marrow rays of oak are extended from the center of the wood, just like the bending wheels of the wheel. Cut to the oak marrow rays from a small angle to minimize the woody wood as much as possible. The emergence of patterns produces straight lines.
5. Pulphic cutting, flat the flat saw plates through a fixed section knife, cut the wooden skin from the bottom of the plate.